How To Disable Anti Theft System On Ford Taurus Without Key Fob
How to disable anti theft system on ford taurus without key fob. How to Disable a Taurus Factory Anti-Theft System Press the unlock button on the remote entry transmitter. To reset the anti theft system on a ford taurus first lock and then unlock the vehicle with the key fob after that insert the key into the ignition and turn it to the on position and allow it to sit there for 4 seconds to clear the code. 3 people found this helpful.
Second step is to turn the on position then replace the positive cable. Insert the key into the ignition and turn it on to the position where the accessories are activated but not the engine. Hold the key in this position for 20 to 30 seconds.
If youve misplaced your remote for the car use the PATS programmed key to unlock the drivers side door. When you turn the key to RUNSTART the theft warning light turns on for 2-seconds. The LED light for the alarm should stop blinking indicating the antitheft system is disabled.
One of the most common ways you can get the anti-theft system to your car to be turned off is by using your cars key fob. Here are a few methods on how to disengage the anti-theft system to give yourself a hassle-free and relaxed driving experience. If you attempt to start the vehicle with an unprogrammed key the theft indicator will flash rapidly and the vehicle will not start.
The anti-theft light will turn off after approximately three seconds indicating the system is disabled. The keys have a built-in chip that sends a code to the alarm system when you insert it into the ignition. Damaged encoded key unprogrammed key non-encoded key key has no electronics wiring concern transceiver concern Passive Anti-Theft System PATS control module concern.
Remove the key and try to start the engine. Up to 16 keys can be programmed. I said HELL NO.
Now you need to know how to disable anti-theft system on Ford Taurus once it gets activated. So before you look to get your key replaced or repaired try these simple steps to reset the anti-theft system of your Ford.
Locate the override button on the alarm box beneath the drivers side of the dashboard.
How to Disable a Taurus Factory Anti-Theft System Press the unlock button on the remote entry transmitter. Now you need to know how to disable anti-theft system on Ford Taurus once it gets activated. Hold the key in this position for 20 to 30 seconds. The problem is that the FOB is no longer able to de-activate the anti-theft system --. Leave the key in the RUN position for 30 seconds for the anti-scan feature to time out. 3 people found this helpful. Press the button and hold it in until the alarm beeps one time. Turn the ignition on. Locate the override button on the alarm box beneath the drivers side of the dashboard.
Turn ignition key to ON position reconnect the battery that should take care of it or use the key to lock and unlock the doors and or the trunk good luck. The display of the car behind the steering will light up and will show the anti-theft light blinking or constantly lit. How to Disable a Taurus Factory Anti-Theft System Press the unlock button on the remote entry transmitter. Up to 16 keys can be programmed. How to Disable a Taurus Factory Anti-Theft System. Remove the key and try to start the engine. With the factory setup you cant bypass the theft system it would require programmed keys.
Post a Comment for "How To Disable Anti Theft System On Ford Taurus Without Key Fob"